0975 398 983
phukienpc.vn@gmail.com
Thẻ nhớ CF Card Swissbit 256Mb công nghiệp
Thẻ nhớ CF-Compact Flash Card công nghiệp 256MB thương hiệu Swissbit (Made in Germany), dùng cho máy CNC, máy tính công nghiệp, thiết bị điện tử, PLC…Sử dụng chạy chương trình, boot hệ điều hành windows, linux, ubuntu…
Bộ nhớ SLC, độ bền cao, hoạt động trong môi trường công nghiệp (chịu nhiệt độ cao, chống sốc, chống rung, tự sửa lỗi….)
Thông số kỹ thuật thẻ CF 256MB Swissbit
Features
- Highly-integrated memory controller
- Fully compliant with CompactFlashTM specification 3.0, compatible with specification 4.1
- Fully compatible with PCMCIA specification
- PC Card ATA Interface supported
- True IDE mode compatible
- Up to PIO mode 6 supported
- Up to MDMA4 supported
- Hardware RS-code ECC (4 Bytes/528 Bytes correction)
- Fix drive (IDE mode) & removable drive (PCMCIA mode) as default configuration
Small form factor
- CFC Type I: 36.4mm x 42.8mm x 3.3mm
Low-power CMOS technology
3.3V or 5.0V power supply
Power saving mode (with automatic wake-up)
S.M.A.R.T. support in *-SMA product type
Optional Security feature: Swissbit ZoneProtection on request in *-ZP1 product type (2GB up to 16GB)
Wear Leveling: equal wear leveling of static and dynamic data The wear leveling assures that dynamic data as well as static data is balanced evenly across the memory. With that the maximum write endurance of the device is guaranteed.
Data Retention: 10 year (JESD47)
Patented power-off reliability
- No data loss of older sectors
- Max. 32 sectors data loss (old data kept)
- All data written to the flash if card status is ready after write command
High reliability
- MTBF > 3,000,000 hours
- Data reliability: < 1 non-recoverable error per 1014 bits read
- Number of connector insertions/removals: >10,000
Hot swappable in PCMCIA modes
High performance
- Up to 66MB/s burst transfer rate in UDMA4
- Sustained Write performance: up to 35MB/s (UDMA4)
- Sustained Read Performance: up to 45MB/s (UDMA4)
Available densities
- up to 32GBytes
Operating System support
- Standard Software Drivers operation CompactFlash
2 Temperature ranges
- Commercial Temperature range 0 … +70°C
- Industrial Temperature range -40 … +85°C
Life Cycle Management
Controlled BOM
RoHS compatible
Bạn sử dụng kết hợp với áo thẻ thẻ 68pin máy cnc và đầu đọc thẻ CF USB, cắm máy tính để nạp chương trình, dữ liệu, hệ điều hành. 2 sản phẩm này bạn mua riêng.
